Publicité
Les langues disponibles
Les langues disponibles
Operation
Max. drain
distillate:
Additional
evaporation time
Forced draining
of the collector
Standby timer
after educt
container runs
empty
Parameters Hei-VAP
Parameters Hei-VAP
In the sub-menu
can be stored (vacuum, hysteresis, rotational speed, heating bath temperature, recirculation
chiller temperature).
These values are for informational purposes only and may be included in a new recipe.
Hei-VAP parameters
Touch the
open the submenu and to enter the required values for the connected rotary evaporator by
hand.
Data logging
See section „Data recording" on page 113.
Selectable if a specific number of distillation drainage steps is
specified in the start window:
In the example: drain distillate six times, then the optional addi-
tional evaporation time runs. This allows a desired concentration
to be achieved!
max. filling: Add. evaporation
The parameters
time
max. drain distillate: additional
and
evaporation time
activated at the same time!
Forced draining of the collector active: Collector will be drained
after 1 – 9999 seconds, regardless of the filling level.
Range: 1 – 9999 s.
Activate/deactivate forced draining of the collector (determines
previous parameter!).
Range: active / inactive
Time until the standby mode is activated after the educt
container runs empty.
Range: 1 – 9999 s.
various parameters of the connected Hei-VAP
button in the footer of the Parameter screen form to
127
are mutually exclusive and cannot be
Publicité
