Publicité
Les langues disponibles
Les langues disponibles
Operation
Parameters
Cycles
Fill
Drain residue
Drain distillate
Distillate
End of process
The
For an evaporation cycle, you can specify either a maximum filling rate
OR a maximum number of distillate drainage steps.
➜
Confirm or discard all changes with
Function
Maximum number of evaporation cycles
• Selection switch in position
• Selection switch in
of cycles in the selection field (adjustment via plus/minus
buttons or tap/on-screen keyboard).
Touch the
/
Maximum filling rate
• Selection switch in position
• Selection switch in
of filling operations in the selection field (adjustment via plus/
minus buttons or tap/on-screen keyboard).
Touch the
/
Residue draining time
• Selection switch in position
• Selection switch in
time in the selection field (adjustment via plus/minus buttons
or tap/on-screen keyboard).
on
off
Touch the
/
Distillate draining time
• In the selection field, define a distillate draining time
(adjustment via plus/minus buttons or tap/on-screen
keyboard).
Maximum number of distillate drainage steps
• Selection switch in
• Selection switch in
number of distillate drainage steps in the selection window
(adjustment via plus/minus buttons or tap/on-screen
keyboard).
Touch the
/
Specify here whether the distillate and/or residue are drained
at the end of the process. Touch the corresponding checkbox to
activate (checkmark) or deactivate the selection.
Fill
Distillate
and
Accept
→ no limit.
position → Define a certain number
icon to switch between the two options.
→ no limit.
position → Define a maximum number
icon to switch between the two options.
off
→ no defined draining time.
on
position → Define a residue draining
icon to switch between the two options.
position → no limit.
position → Define a maximum
icon to switch between the two options.
parameters are mutually exclusive!
Cancel
or
.
125
Publicité
