Publicité
Les langues disponibles
Les langues disponibles
Operation
Parameters
Pre-evacuation
Fill
Evaporate
Drain residue
Drain distillate
End of process
Process parameters
Process parameters
Tap the
–
The process parameters menu opens.
➜
Touch the function button of the desired parameter and adjust the value using the screen
keyboard, see also „User input" on page 99.
Parameters
Heating tape
Heating tape
automatic
Standby timer
after educt
container runs
empty
➜
➜
Function
Adjustable time for the pre-evacuation phase
Before starting the process loops evaporation – filling – draining,
the system is pre-evacuated for the time set here.
Filling time setting
Adjust the filling time as required using the plus/minus buttons.
Evaporation time setting
Adjust the evaporation time as required using the plus/minus
buttons.
Residue draining time
• Selection switch in position
• Selection switch in
draining time in the selection field (adjustment via plus/minus
buttons or tap/on-screen keyboard).
on
off
Touch the
/
Distillate draining time
• In the selection field, define a distillate draining time
(adjustment via plus/minus buttons or tap/on-screen
keyboard).
Specify here whether the distillate and/or residue are drained
at the end of the process. Touch the corresponding checkbox to
activate (checkmark) or deactivate the selection.
button in the footer.
Function
Performance of the heating tape during operation.
Range: 10 – 100% in increments of ten.
(see „Heating tape (optional)" on page 92)
Automatically switch on heating tape yes/no.
Range: on / off.
Time until the standby mode is activated after the educt
container runs empty.
Range: 1 – 9999 s.
Hei-VAP parameters
page 127.
Save
, see section „Recipes" on page 128.
off
→ no defined draining time.
on
position → define a residue container
icon to switch between the two options.
, see section „Parameters Hei-VAP" on
138
Publicité
