Heidolph Hei-VOLUME Distimatic Pro Notice D'instructions page 115

Commissioning
Connectivity
All necessary network parameters and basic settings for time synchronization can be defined in
Hei-CONTROL Pro
the
➜
The connection status of the Hei-CONTROL Pro application is displayed in the [Status]
field.
➜
All associated parameters can be defined manually in [static IP configuration] mode
(checkbox deselected, figure on the left). Select the checkbox (figure on the right) to obtain
the IP address of the device automatically.
➜
Select the [NTP server] checkbox to synchronize the system time of the device with a time
server. This function requires a valid IP configuration!
– Place the cursor in the corresponding input field and use the on-screen keyboard to
enter the required server address.
If the time is synchronized via a time server, the
Timer
a time zone.
If an ethernet connection exists, the system time is updated automati-
cally via the defined time server. To define the system time manually, the
[NTP server] option must be deselected!
The full functionality of the Hei-CONTROL Pro application is not avai-
lable in the current device version.
menu:
function button in the display header can only be used to select
115
System time/