MR TAPCON 250 Instructions D'installation page 79

7 Initial steps
Maschinenfabrik Reinhausen GmbH 2022
Establishing a connection via front interface
1. Remove the interface cover on the front of the device.
2. Connect the PC and the device via the front interface using an Ethernet
cable (RJ45 plug).
Figure 59: Establishing a connection via front interface
3. Enter the visualization's IP address http://192.168.165.1, or if SSL
encryption is active, enter https://192.168.165.1 in the browser on
the PC.
ð The visualization is accessed.
Establishing a connection via the rear CPU-X3 interface
1. Connect the PC and device.
2. Go to Communication on the device to display the device's IP address.
3. Assign a unique IP address to the PC in the same subnet as the device
(e.g. 192.0.1.100).
4. Enter the visualization's IP address in your PC's browser.
ð The visualization is accessed.
Setting the language
English
German
French
Spanish
Korean
Table 14: Available display languages
8741483/02 EN
Italian
Portuguese
Russian
Chinese
Polish
TAPCON
®
250 79