MR TAPCON 250 Instructions D'installation page 31

4 Product description
Maschinenfabrik Reinhausen GmbH 2022
9 BACK key
10 ENTER key
1)
Key without function if a digital input is used to switch between AUTO/
MANUAL and this is activated with the parameter Pulse type digital input
set to Continuous signal.
2)
Key without function if a digital input is used to switch between LOCAL/RE-
MOTE and this is activated with the parameter Pulse type digital input set
to Continuous signal.
3)
Only possible with user authorization and in the local (manual mode) oper-
ating mode.
4.3.2 LEDs
Figure 9: LEDs
1 Light-level sensor
2 Power supply LED
3 AVR STATUS LED
8741483/02 EN
Exit the current menu. Return to the pre-
vious menu level
Confirm selection
- -
Green Lights up during commissioning / volt-
age connection of the display.
Red Illuminates when the device is in the
error state.
Yellow Illuminates when the device starts or
has been paused; e.g. during a soft-
ware update.
Blue Illuminates when the device is in the
operating state.
TAPCON
®
250 31