MR TAPCON 250 Instructions D'installation page 70

®
70 TAPCON 250
Characteristics
Rated switching capacity
Table 13: Permissible fuse types
1. Voltage measurement: Feed the wires into the terminals in accordance
with the connection diagram and fasten them using a screwdriver.
2. Current measurement: Feed the wires into the terminals in accordance
with the connection diagram and fasten them using a screwdriver.
6.4.7 Wiring the MC 2-2/SW3-3 assembly
1. Insert the supplied SFP module into the corresponding Ethernet interface
in accordance with the connection diagram and fold the clasp
Figure 51: Engaging the SFP module
Miniature circuit breaker
B, C, K or Z
For installation in accordance with IEC 61010-2-30
8741483/02 EN
6 Mounting
Safety fuse
Fast-acting, medium-act-
ing or delayed-acting
50 kA
CAT II: 10 kA
Maschinenfabrik Reinhausen GmbH 2022
down.