MR TAPCON 250 Instructions D'installation page 11

1 Introduction
1.4.1.1 Warning relating to section
WARNING
1.4.1.2 Embedded warning information
1.4.1.3 Signal words in warning notices
Maschinenfabrik Reinhausen GmbH 2022
1.4 Notation conventions
1.4.1 Hazard communication system
Warnings in this technical file are displayed as follows.
Warnings relating to sections refer to entire chapters or sections, sub-sec-
tions or several paragraphs within this technical file. Warnings relating to
sections use the following format:
Type of danger!
Source of the danger and outcome.
► Action
► Action
Embedded warnings refer to a particular part within a section. These warn-
ings apply to smaller units of information than the warnings relating to sec-
tions. Embedded warnings use the following format:
DANGER! Instruction for avoiding a dangerous situation.
Signal word Meaning
DANGER Indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING Indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION Indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury.
NOTICE Indicates measures to be taken to prevent damage to property.
Table 1: Signal words in warning notices
1.4.2 Information system
Information is designed to simplify and improve understanding of particular
procedures. In this technical file it is laid out as follows:
8741483/02 EN
®
TAPCON 250 11