MR TAPCON 250 Instructions D'installation page 30

®
30 TAPCON 250
4.3.1 Display, operating elements and front interface
Figure 8: TAPCON®250 display
1 Display
2 RIGHT cursor
3 LEFT cursor
4 Front interface
5 AUTO/MANUAL key
6 Miniature circuit breaker
7 LOCAL/REMOTE key
8 RAISE/LOWER key
-
Navigate to the right in the menu
Navigate to the left in the menu
RJ45 Ethernet interface
1)
Switches between AUTO/MANUAL oper-
ating mode
Voltage 250 VAC / 2.5 A
2)
Switches between LOCAL/REMOTE op-
erating mode
Sends a command to the motor-drive
unit to raise/lower the voltage.
8741483/02 EN
4 Product description
3)
Maschinenfabrik Reinhausen GmbH 2022