Publicité
Set up
Requirements for the quality of mains sockets
A
Contact surface is only half the height of the plug-
in contact
B
Contact surface covers the full height of the plug-
in contact
C
Small contact surface between terminal screw and
wire.
D
Wide contact surface between terminal plate and
wire
1. Time of printing. Further information is available from your Porsche partner.
42
Requirements for cable installation
Unsuitable power cable
DANGER
The use of unsuitable power cables or excessive
electrical currents can cause a short circuit, electric
shock, explosion, fire or burns.
e
The cable must have a 50-amp fuse.
e
Only use copper cables with a minimum cross-
section of 8 AWG, or preferably 6 AWG.
Requirements for outdoor installation
Direct contact with rain
DANGER
If the charging equipment is used outdoors, direct
contact with rain can cause a short circuit, electric
shock, explosion, fire or burns.
e
Prevent the charging equipment from coming
into direct contact with rain.
e
Use a NEMA 3R rainproof enclosure.
Changing supply cables
Electric shock
DANGER
Risk of serious or fatal injury from electric shock.
e
Before changing the supply cable, always unplug
the supply cable from the electrical socket and
disconnect the vehicle cable from the vehicle
charge port.
e
Only change cables in a dry environment.
e
Only use the control unit with vehicle cable in
conjunction with a supply cable included in the
scope of supply or a supply cable approved by
Porsche.
g Refer to chapter "Scope of supply" on page 36.
e
In some countries, e.g. in Norway or Japan
changing the supply cable is prohibited. Further
information is available from your Porsche part-
ner.
,
1
Publicité
