Publicité
Scope of supply
Scope of supply
Fig. 11: Overview of charger
A
Supply cable (detachable from control unit)
B
Plug of the supply cable on the control unit.
C
Power plug for connecting to the mains supply
D
Vehicle plug (connector plug for the vehicle)
E
Vehicle cable (permanently installed on control
unit)
F
Control unit
36
Overview
Charger control unit
Fig. 12: Control unit
A
ON/OFF button with indicator light and addi-
tional charging current limiting function
B
Power supply/domestic connection indicator
light
Vehicle indicator light
Control unit indicator light
C
Reset button with indicator light
The operating state of the control unit and charging
current limiting can be set using the ON/OFF button
.
The control unit can be reset using the reset button
if residual current is detected.
The indicator lights A – C (Fig. 12) indicate the op-
erating state of the control unit, whether charging
current limiting is set and possible faults by means of
different colours, illumination and flashing.
g Refer to chapter "Control unit status indicators and
error messages" on page 47.
Publicité
