Operation - Bartscher 104.825A Mode D'emploi

12.2 OPERATION

The appliance has a thermostat probe in the ice bin, which stops ice production when the ice accumulated in the bin reaches the probe
connected to the thermostat.
When ice is taken from the bin, the thermostat will automatically reactivate ice production, thus creating a new supply of ice.
FUNCTIONS
ON/OFF PUSH
BUTTON
DEFR. PUSH
BUTTON
WASH PUSH
BUTTON
ON/OFF PUSH BUTTON:
DEFR. PUSH BUTTON:
WASH PUSH BUTTON:
FUNCTIONS
Pressing the ON/OFF push button, at the appliance's start-up, the green LED start to flash for 3 minutes,
during this time the water is charged in the appliance's basin.
After the 3 minutes have elapsed, the appliance starts a defrost cycle: green LED and yellow LED are lit.
Once the defrost is over, the appliance starts the ice production: green LED is lit.
It is possible to start at any time the defrost cycle pressing the DEFR. push button, the yellow LED is lit.
This operation must be performed by professional and qualified technical person.
Pressing the WASH push button, the appliance starts the washing cycle: the blue LED starts to flash.
ATTENTION:
To Push "W" (washing) use only a plastic tool with rounded toe applying a slight pressure. (fig. 3).
Please not use a screw or similar tools.
The washing cycle is made by the following phases:
•
defrost (yellow LED lit + green LED lit + blue LED flashing)
•
30 minutes when only the water pump is operating (green LED lit + blue LED flashing);
•
60 minutes when the water inlet valve and water pump are operating (green LED lit + blue LED flashing)
DEFR.
WASH
used to turn on and turn off the appliance - GREEN LED
allows to start the defrost cycle - YELLOW LED
allows to start and/or finish the washing cycle - BLUE LED.
D
W
GREEN LED
YELLOW
LED
BLUE LED
DEFR.
D
D
W
W
WASH