Authorised Use; Predictable Misuse; Basic Safety Instructions - Burkert 6203 EV Manuel D'utilisation

3.

auThOrisEd usE

Non-authorized use of the solenoid valve Type 6203
EV may be a hazard to people, nearby equipment
and the environment.
• The device is designed to control, shut off and meter
neutral media up to a viscosity of 21 mm
• Provided the device socket is connected and installed
correctly, e.g. Bürkert Type 2508, the device satisfies
protection class IP65 in accordance with DIN EN 60529
/ IEC 60529.
• Use according to the authorized data, operating and
service conditions specified in the contract documents
and operating instructions. These are described in the
chapter on "Technical data".
• Correct transportation, correct storage and installation
and careful use and maintenance are essential for reliable
and faultless operation.
• Use the device only as intended.
3.1. restrictions
If exporting the system/device, observe any existing
restrictions.
english
4
4. basic safETy
insTrucTiOns
These safety instructions do not make allowance for any
• contingencies and events which may arise during the
installation, operation and maintenance of the devices.
• local safety regulations – the operator is responsible for
observing these regulations, also with reference to the
installation personnel.
Danger – high pressure!
• Before loosening the lines and valves, turn off the pres-
sure and vent the lines.
Risk of electric shock!
• Before reaching into the system, switch off the power
supply and secure to prevent reactivation.
• Observe applicable accident prevention and safety
regulations for electrical equipment!
Risk of burns/risk of fire if used for a prolonged switch-
on time through hot device surface!
• Keep the device away from highly flammable substances
and media and do not touch with bare hands.
english
6

3.2. predictable misuse

• The device may only be used in the explosion-protected
• Do not put any loads on the housing (e.g. by placing objects
/s.
2
• Do not make any external modifications to the device
Risk of injury due to malfunction of valves with alter-
nating current (AC).
Sticking core causes coil to overheat, resulting in a
malfunction.
• Monitor process to ensure function is in perfect work-
Risk of short-circuit/escape of media through leaking
screw joints.
• Ensure seals are seated correctly!
• Carefully screw together coil and device socket or valve
General Hazardous Situations.
To prevent injuries:
• Ensure that the system cannot be activated unintentionally.
• Installation and maintenance work may only be carried
• After an interruption in the power supply, ensure that the
area if an appropriate additional identification is attached
to the type label.
on it or standing on it).
housings. Do not paint the housing parts or screws.
ing order!
and connection plate!
out by authorized technicians with the appropriate tools.
process is restarted in a defined or controlled manner.
Type 6203 EV
english
5
english
7