Installation; Safety Instructions; Fluid Installation - Burkert 6126 Manuel D'utilisation

Masquer les pouces Voir aussi pour 6126:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7

INSTALLATION

7.1

Safety instructions

DANGER!
Risk of injury from high pressure in the equipment!
▶ Before loosening the lines and valves, turn off the pressure and
vent the lines.
Risk of injury due to electrical shock!
▶ Before reaching into the device or the equipment, switch off the
power supply and secure to prevent reactivation!
▶ Observe applicable accident prevention and safety regulations for
electrical equipment!
WARNING!
Risk of injury from improper installation!
▶ Installation may be carried out by authorized technicians only and
with the appropriate tools!
Risk of injury from unintentional activation of the system and
an uncontrolled restart!
▶ Secure system from unintentional activation.
▶ Following installation, ensure a controlled restart.
10
english
7.2

Fluid Installation

DANGER!
Risk of injury from high pressure in the equipment!
▶ Before loosening the lines and valves, turn off the pressure and
vent the lines.
Installation position: any, actuator preferably upwards.
Installation
Before installation, clean any possible dirt off the pipelines and
flange connections.
If required, install a dirt trap to prevent malfunctions.
Mesh size: 5 µm
Pay attention to the flow direction of the valve.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

6606

Table des Matières