Information On The Internet; System Description - Burkert 6126 Manuel D'utilisation

You can obtain an excerpt from the type approval from the address
below
Bürkert Werke GmbH & Co KG
Zulassungsbeauftragter
Christian-Bürkert-Str.13-17
D-74653 Ingelfingen
4.4

Information on the Internet

Operating instructions and data sheets for Types 6126 and 6606
can be found on the Internet at:
www.burkert.com Documentation
6
Type
english
5

SYSTEM DESCRIPTION

5.1 Intended Application Area
The solenoid valves Type 6126 and Type 6606 are designed for use
in analytical, medical and laboratory technology. They can be used
primarily for the metering, filling, mixing and distribution of small
amounts.
5.2 General Description
The solenoid valves Type 6126 and Type 6606 are direct-acting
rocker solenoid valves. They have a minimum dead volume and
a non-split, easy-to-rinse inner contour. The medium comes into
contact with the body material and the seals only. The heat transfer
into the medium is minimal, as the body is also separated from the
coil by a stainless steel plate.
Modularity
The valve is modular in design and can be supplied with different
port connections according to the application case. It can be used
individually and also in blocks.