Burkert 6126 Manuel D'utilisation page 4

WARNING!
Leaking medium when the diaphragm is worn.
▶ Regularly check for leaking medium.
▶ If the media is hazardous, protect the environment from danger.
General hazardous situations.
To prevent injury, ensure that:
▶ The system cannot be activated unintentionally.
▶ Installation and repair work may be carried out by authorized
technicians only and with the appropriate tools.
▶ After an interruption in the power supply or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
▶ The device may be operated only when in perfect condition and
in consideration of the operating instructions.
▶ The general rules of technology apply to application planning
and operation of the device.
4
english
NOTE!
Electrostatic sensitive components / modules!
The device contains electronic components which react sensitively
to electrostatic discharge (ESD). Contact with electrostatically
charged persons or objects is hazardous to these components.
In the worst case scenario, they will be destroyed immediately or
will fail after start-up.
• Observe the requirements in accordance with
EN 61340-5-1 and 5-2 to minimise or avoid the possibility of
damage caused by sudden electrostatic discharge!
• Also ensure that you do not touch the electronic components
when the power supply voltage is present!
The solenoid valves Type 6126 and Type 6606 were developed
with due consideration given to the accepted safety rules and are
state-of-the-art. Nevertheless, dangerous situations may occur.
Failure to observe this operating manual and its operating instruc-
tions as well as unauthorised tampering with the device release
us from any liability and also invalidte the warranty covering the
device and accessories!