Moog infinity Manuel De L'opérateur page 29

To adjust these settings:
Key Sequence for "Adjusting User Preference Settings"
HIGH
LOW
AUTO PRIM ON
AUTO PRIM OFF
Step 1:
With pump turned off, press and hold for 1.5 seconds the
ON/OFF keys at the same time. Pump will beep and then display the words
BEEP HIGH or BEEP LOW. Press the
change to LOW. Pump will give a triple beep when the
and setting will change. If setting is as desired, do not press either key.
Step 2:
Press the
(locked). Press the
to UNLK (unlocked). If setting is as desired, do not press either key.
Step 3:
Press the
WHEN DONE. Press the
change to MUTE WHEN DONE. If setting is as desired, do not press either key.
Step 4:
Press the
+
OFF. Press the key to change to LITE ON or the
to LITE OFF. If setting is as desired, do not press either key.
Step 5:
Press the
PRIM OFF. Press the
to AUTO PRIM OFF. If setting is as desired, do not press either key.
Step 6: ON/OFF
Press the
NOTE: Once user has changed the desired user preference setting,
it is not necessary to view the remaining user preference settings.
Each change will be automatically saved as it is made.
NOTE: Pump will turn off automatically after 2 minutes in the User
Preference Settings if the user does not turn it off before then.
LOCK
UNLK
+
PRIME
key. Display will read UNLK (unlocked) or LOCK
+
key to change to LOCK (locked) or the
PRIME
key again. Display will read MUTE WHEN DONE or BEEP
+
key to change to BEEP WHEN DONE or the
PRIME
key again. Display will read LITE ON or LITE
PRIME
key again. Display will read AUTO PRIM ON or AUTO
+
key to change to AUTO PRIM ON or the
to turn pump off. Setting changes will be saved automatically.
MUTE
BEEP
key to change to HIGH or the
-
key to change
27
2. DIRECTIONS FOR USE
LITE ON
LITE OFF
+ and the
-
key to
+ -
or keys are pressed
-
key to change
-
key to
-
key to change
© Copyright 2022 Moog, Inc.