Keypad; Figure 1-3 Keypad Layout - Moog infinity Manuel De L'opérateur

Keypad

ON/OFF
Press
to either turn Infinity on or off.
PRIME
Press
disposable set with fluid.
Prime key is used for hold to prime and
auto prime. See page 15 for hold to prime
and page 26 for auto prime.
RUN/PAUSE
Press
pump or place it in pause mode.
FEED INT
Press
interval setting.
VOL/TOTAL
Press
feeding. Press key again to display total cumulative volume
delivered in all feed cycles since total volume was last cleared.
RATE/DOSE
Press
CLEAR
Press
Press and hold for three seconds to clear rate, dose, feed interval
and volume delivered to minimum values at the same time.
+
Press
and hold key to increase value rapidly.
-
Press
and hold key to decrease value rapidly.
Note: The following keys only function when pump
is in pause mode: PRIME, CLEAR, +, and
key for 1.5 seconds
key to rapidly fill
key to either start
key to display feed
key once to display volume delivered for current
key to transition between rate and dose settings.
key to reset displayed function to its minimum value.
key to increase displayed feed function. Press
key to decrease displayed feed function. Press
-
.
9
1. PUMP COMPONENTS

Figure 1-3 Keypad Layout

© Copyright 2022 Moog, Inc.