To Stop Push Prim; Battery Doesn't Hold Its Charge; Battery Doesn't Charge; Charger Installed But No Plug Symbol Visible - Moog infinity Manuel De L'opérateur

3. ALARMS, MESSAGES, AND INDICATIONS
TO STOP PUSH PRIM (Figure 3-13)
When the auto prime is initiated, the pump screen will
read TO STOP PUSH PRIM. To stop priming, push the
PRIME key. See page 26 for information on auto prime.

Battery Doesn't Hold Its Charge

Battery will lose its charge if stored for a long
period of time or if stored at high temperatures
(such as in an automobile during summer).
To correct the problem: Recharge the battery. If the problem continues
during regular use, contact your healthcare provider for service.

Battery Doesn't Charge

If the battery symbol and the E and F of the fuel
gauge (Figure 3-14) are flashing while the pump
is plugged in, the battery is not charging.
To correct the problem: Contact your
healthcare provider for service.

Charger Installed but No Plug Symbol Visible

If the plug symbol does not display after the AC Adapter/Charger is plugged
into pump and a live power outlet, then charger is not charging battery.
To correct the problem: Check the following:
4 Verify that the wall outlet works by plugging in
another appliance, such as a lamp.
4 Charger is connected properly.
If this does not correct the problem, pump or charger may be
damaged. Contact your healthcare provider for service.
NOTE: There are no user serviceable or replaceable components inside the Infinity.
Infinity Enteral Feeding Pump Operator's Manual
®
34
Figure 3-13 TO STOP PUSH
PRIM Indication
Figure 3-14 Battery Symbol and
the E and F of the Fuel Gauge