Display; Figure 1-4 Display Segments; Figure 1-5 Alphanumeric Characters And Units; Figure 1-6 Setting Indicators - Moog infinity Manuel De L'opérateur

1. PUMP COMPONENTS

Display

The display includes large alphanumeric
characters, as well as smaller symbols
and words. All segments and symbols on
the display are shown in Figure 1-4.
Settings and messages are displayed in large
alphanumeric characters (Figure 1-5).

Figure 1-4 Display Segments

When the large alphanumeric characters
display numbers, one of the smaller words
below the characters indicates which
function is being displayed (Figure 1-6).
The run symbol indicates pump
is running (Figure 1-7).
Figure 1-5 Alphanumeric
Characters and Units
The wall plug symbol indicates the charger
is plugged in, and connected to a live
power outlet. The battery symbol indicates
pump is running on battery power only.
The fuel gauge symbol indicates how much
battery charge remains (Figure 1-8).
NOTE: When operating on A/C power the

Figure 1-6 Setting Indicators

display light will remain on. When operating
on battery power the display light will
automatically turn off 10 seconds after the last
key is pressed. If you would prefer the light
to turn off when connected to an outlet, you
can change the pump light setting to OFF. See
the User Preference Settings section (page
25) for instructions to change this setting.

Figure 1-7 Run Indicators

Figure 1-8 Power Indicators

10
Infinity Enteral Feeding Pump Operator's Manual
®