Care And Maintenance - Marcato Atlas 150 Mode D'emploi

Material included in
the box
• Machine body
• Crank
• Clamp
• Instruction manual
• Slide (Atlas slide only)
• Pastadrive motor and
power cord (Atlasmotor and
Ampiamotor only)
How to prepare the
machine for use
Fix the machine to the work
surface by inserting the clamp
in the appropriate hole (fig. 1 )
insert the crank and always turn it
clockwise (fig. 2 ).
Inserting the slide
If you have Atlas Slide, insert the
slide in the appropriate guides
(fig. 3 ).
Connect the motor
If you have Atlasmotor or
Ampiamotor connect the motor on
the side of the machine as shown
in figure 4 .
If you are using the machine for
the first time, clean the rollers
with a damp cloth and then pass a
little dough between them which
will then be eliminated.
Pull the regulator outwards and
turn it to position No. 0 (fig. 5 ).
Once the dough is prepared, pass
it several times in the position
No. 0, folding the sheet in half
and flouring it at each step, until
obtaining a regular and compact
shape (fig. 6 ).
Then pass the sheet once for each
number until reaching the desired
thickness.
Once the desired sheet thickness
is obtained, cut it into pieces
about 25 cm long and lightly flour
it on both sides.
ENGLISH
Move the crank into the hole of
the cutting rollers and pass the
sheet to obtain the chosen pasta
format.
Care and
maintenance
Do not wash the machine and
accessories in water or in the
dishwasher.
To clean use a cloth and a brush
(fig. 7 ).
The combs under the cutting
rollers are removable, this
allows a greater cleaning of the
accessory.
How to clean the combs:
• Press the rod downwards and
push it sideways to remove it
(fig. 8 ).
• Insert the rod into the central
hole of the comb and remove it
from the seat (fig. 9 ).
• Clean the rollers and the comb
with a brush or cloth.
• To reinsert everything, repeat
the above operations in reverse.
In case of squeaking, insert a few
drops of Vaseline oil suitable for
food contact at the ends of the
rollers (fig. 10 ).
Warranty
Marcato products are manufactured
with the best materials available
and undergo continuous quality
checks. For this reason, we
guarantee assistance for 10 years
against manufacturing defects
(except for the Atlasmotor and
Ampiamotor products which are
guaranteed for 2 years from the
date of purchase). However, the
warranty does not cover damage
caused by improper use or use
other than that illustrated in this
manual.
11