Product Description And Type Designation; Product Overview - Videotec ULISSE2 Manuel D'instructions

4 Identification
4.1 Product description and type
designation
ULISSE2 is an outdoor full IP PTZ unit for control
and management of all third-party IP cameras
and thermal imaging cameras (ONVIF-S or those
equipped with an RS485 serial port), with direct
access via a browser to the camera's interface for
setup and diagnostics.
Thanks to ONVIF-S protocols, the Full IP connectivity
of the ULISSE2 allows you to network-control P&T
plus all camera functions, including the wiper, washer
pump, pre-sets, illuminator activation and setup,
using the most popular VMS' on the market.
The advanced protection technology used has
allowed certain characteristics of the new PTZ to be
enhanced, such as the temperature range of -40°C
(-40°F) to +65°C (+149°F). The unit can be demisted
with forced air and the temperature is constantly
controlled, thus preventing condensation and
guaranteeing an ideal operating temperature range
for the camera.
The LED illuminators are easily integrated onto the
P&T, even post-installation, without the need for
additional power sources and independently of
the unit's power supply. The second illuminator can
be turned on at certain zoom parameters, pre-set
positions or manually to avoid spotlighting a near-by
subject or to control a floodlight.
The PTZ is equipped with a wiper that, with the help
of the optional washer kit, always keeps the camera
window clean for perfect visibility in all weathers.
The efficient automatic self-test rapidly detects the
state of the system and all reported events are stored
in the internal log. A complete system backup is
possible via the Micro SD slot.
Improved accessibility to connections allows you
to carry out wiring and diagnostics quickly and
easily, without dismantling the product. ULISSE2
can be completely assembled using a single hex key
(supplied)
10

4.2 Product Overview

The product consists of 4 parts:
1. Upper part of the housing.
2. Third party camera and motorised lens (not
supplied)/Third party camera with integrated
lens (not supplied)/Visible camera module
(accessory).
3. Body.
4. Base.
Fig. 1
01
02
03
04
MNVCU2_2222_EN