Identification; Product Description And Type Designation; Product Markings; Checking The Markings - Videotec ULISSE NETCAM Manuel D'instructions

4 Identification

4.1 Product description and type
designation
ULISSE NETCAM was specifically designed for external
IP video surveillance applications, in combination
with modern SD, HD and Megapixel cameras. A
special feature on this device is the ability to easily
control, via the network, all the camera's pan &
tilt functions (including wiper, preset and set-up)
with a vast majority of the VMS on the market.
The outstanding added feature is the ability to use
any cameras compatible with ONVIF, S profile, or
proprietary protocol over RS-485, while the entire
system management requires only an IP address.
Control of the positioning system is done via the
network, using the ONVIF, S profile, protocol.
ULISSE NETCAM supports network cameras with
motorised standalone lenses or integrated lenses.
The positioning unit can be used in several kinds
of installations, such as: coast and border patrol,
harbour control, urban settings, highway and traffic
monitoring, stadiums, industries, prisons or military
applications, and perimeter surveillance.
10

4.2 Product markings

Pan & tilt devices have a label complying
with CE markings.
Fig. 1
The label on the body shows:
• Model identification code (Extended 3/9 bar code)
• Power supply voltage (Volt)
• Frequency (Hertz).
• Current consumption (Amps).
• IP protection degree.
• Serial number.

4.2.1 Checking the markings

Before proceeding further with installation, make
sure the material supplied corresponds to the order
specification by examining the marking labels.
Never, under any circumstances, make any changes
or connections that are not described in this
handbook: the use of inappropriate appliances may
expose personnel and the system to serious safety
hazards.