Videotec ULISSE2 Manuel D'instructions page 37

• Serial Port: Communication type to control the
device.
• Protocol: Communication protocol.
• ACK Sending: Enables sending ACK on each
command received.
• Baudrate: Sets the communication speed.
• Serial Type: Serial line type through which the
product receives the commands.
• Bit data: Number of bits for each data package.
• Parity Check: Data consistency control mode.
• Stop Bits: Number of stop bits for each data
package.
• Lens Characteristics: Installed lens characteristics.
• Lens: Type of lens installed.
• NONE: No lens installed.
• FIXED: Lens with zoom and fixed focus.
• INTEGRATED: Lens controlled by the camera.
• INDEPENDENT MOTORISATION: Lens with
reverse polarity motor.
• MOTORISATION BY COMMON WIRING: Lens
with a common wiring motor.
• MOTORISATION BY 485: Lens controlled via
serial RS 485.
• Model: Selects 485 lens model.
• Protocol: Selects the protocol to use to
communicate with the lens.
MNVCU2_2222_EN
• Baudrate: Selects the Baudrate to use to
communicate with the lens.
• Serial Type: Selects the communication mode
with the lens.
• ACK Sending: Enables ACK waiting time on
each message sent to the lens.
• Preset: Specifies the maximum number of
Presets the lens can manage.
• Zoom Factor: Number of magnifications that
can be reached by the lens.
• Zoom Rotation Polarity: Reverses the lens
rotation during Zoom activity.
• Focus Rotation Polarity: Reverses the lens
rotation Focus activity.
• Lens with Potentiometers: Presence of
potentiometers to detect the Zoom and Focus
positions.
• One-push Autofocus Trigger: Determines the
type of event that activates autofocus.
• MANUAL: Activation only takes place on the
web page or ONVIF command.
• PTZ MOVEMENT+MANUAL: Activation at
the end of PAN-TILT or ZOOM movement, or
from the web page or the ONVIF command.
• DISABLED: Function disabled.
• One-push Autofokus Duration: Sets how long
autofocus stays on.
• One-push Autofocus Polarity: Selects the
default status of the autofocus relay.
35