Lens Control - Videotec ULISSE2 Manuel D'instructions

10.3.3.3 Horizontal and vertical movement
The virtual keyboard allows you to move the unit. Use
the drop-down menu under the virtual keyboard to
set the speed.
Fig. 60
The unit can also move by clicking directly on the
snapshot in the desired direction.
Fig. 61

10.3.3.4 Lens control

• Zoom Wide/Zoom Tele
Fig. 62
38
• Focus Near/Focus Far/Autofocus: The Autofocus
is only available with the camera module visible or
motorised lenses equipped with autofocus.
Fig. 63
10.3.3.5 Wiper and wash system control
• Wiper/Wash System: The wash system must be
enabled in order to use it.
Fig. 64
10.3.3.6 Day/Night mode control
• Day Mode/Night Mode: Day Mode switches off
the illuminators and sends the command to insert
the IR filter on the camera. Night Mode switches
on the illuminators and sends the command to
remove the IR filter to the camera.
Fig. 65
10.3.3.7 Slave illuminator control
• Off/On: The Slave illuminator can be switched on
or off manually.
Fig. 66
MNVCU2_2222_EN