Identification; Product Description And Type Designation - Videotec MAXIMUS MBX Manuel D'instructions

4 Identification

4.1 Product description and type
designation
MAXIMUS MBX is much more than just a simple
explosion-proof junction box. In fact, it is a
communication box equipped with everything
needed to connect one or more IP or analogue
cameras.
MAXIMUS MBX has been designed to integrate and
work exclusively with the MAXIMUS range of Videotec
products.
MAXIMUS MBX provides a local, low-voltage power
supply. It also allows a Fast Ethernet connection,
thanks to an integrated Ethernet switch equipped
with 3 RJ45 ports and an SFP port for fibre optic
connection. The type of SFP module can be chosen
according to the installation requirements. The
internal spaces are designed to make access to cables
easier, and to increase user-friendliness when it
comes to connection procedures. The internal board
also offers the bypass for analog video signals and for
all the inputs and outputs which are present in the
Videotec MAXIMUS products.
MAXIMUS MBX is the complete and competitive
solution for professional installation of Videotec's
MAXIMUS explosion-proof products.
MAXIMUS MBX has been designed to connect a PTZ
camera and its washing kit, or in alternative two fixed
cameras and their washing kits. (Fig. 1, page 8 and
Fig. 2, page 8).
8
Main power supply
Fig. 1
Main power supply
2° Videotec camera
Fig. 2
Videotec PTZ
Solenoid valve,
Videotec washing
system (WASEX)
1° Videotec
camera
1° Solenoid valve,
Videotec washing
system (WASEX)
2° Solenoid valve,
Videotec washing
system (WASEX)
MNVCMBXSW_2222_EN