Videotec ULISSE2 Manuel D'instructions page 41

10.3.3.8 Preset Management
• Scan Preset/Set Preset/Remove Preset
Fig. 67
• Run Patrol: The patrol function requires at least
2 presets to have been saved. The speed of
movement and waiting times can be configured
in the relevant chapter(10.3.13 Preset (Advanced)
Page, page 43).
Fig. 68
• Run Autopan: Continuous recall of the 2
configured positions. For further information refer
to the relative chapter(10.3.9 Autopan Page, page
42).
Fig. 69
• Go to Home Position: Recalls the preset number
1 position.
Fig. 70
MNVCU2_2222_EN
10.3.3.9 Relay and alarm status control
• Enables the Relay/Disables the Relay: After
selecting relay in the dropdown menu the contact
status can be set.
Fig. 71
• AL1/AL2/AL3/AL4/ALHOUSING/RL1/RL2/DNH
OUSING: It displays the status of the alarms and
relays. Red indicates that the alarm or the relay
is enabled. Green indicates that the alarm or the
relay is disabled.
Fig. 72
10.3.3.10 Device control using the keyboard
It is possible to control the device via the PC
keyboard using the keys indicated in the diagram.
Preset 1 Preset 9
Fig. 73
Zoom
Pan & Tilt Speed
Pan & Tilt Movement
39