Burkert 8625-2 Manuel D'utilisation page 27

All manuals and user guides at all-guides.com
6.6.4 AMPL - setting the amplification Kp
Select the amplification factor K
setting: 1.00). If it is attempted to set a higher value, the display will jump
automatically to 0 and a value must be entered within the range.
Setting aid:
• If excessive overshoot occurs at the value of K
becomes unstable, you should decrease K
• On the other hand, unsatisfactory control dynamics may be improved by
raising K as long as the abovementioned instability does not occur.
P
Fig.: Setting the amplification K
in a range from 0.00 to 10.00 %/K (factory
P
set or the control
P
.
P
increase digit
next digit
2 s set decimal point
P
8625-2 Standard - 25