Product description
4.2.
Warranty Terms
This document does not offer any form of warranty. Please refer to
our general terms of sales and business. The warranty is only valid
if the device is used as intended in accordance with the specified
application conditions.
The warranty extends only to defects in the diaphragm valve
Type 2103 and its components.
We accept no liability for any kind of consequential damage
which could occur due to failure or malfunction of the
device.
4.3.
licences
The approval mark indicated on the Bürkert rating plates refers to
Bürkert products.
4.4.
information on the internet
The operating instructions and data sheets for Type 2103 can be found
on the Internet at:
www.burkert.com
Documentation
Type 2103
There is also complete documentation on CD. The complete operating
instructions can be ordered by quoting the following identification
number: 00805642
All manuals and user guides at all-guides.com
Type 2103
manuals/data sheets
5.
prOducT descripTiOn
5.1.
general description
The piston-controlled diaphragm valve Type 2103 is suitable for
liquid and gaseous media.
Using neutral gases or air (control media), it controls the flow of
dirty, aggressive, ultrapure or sterile media, even highly viscous
media can be used (flow media).
5.2.
properties
•
Any flow direction.
•
Self-draining for appropriate installation. The ends of the utilised
connections must be cylindrical.
•
Free of empty space
•
Low-turbulence flow
•
High flow values by the streamlined valve housing
•
Maintenance-free under normal conditions.
5.2.1.
Options
•
Activation unit
Different versions of the activation units are available depending
on the requirement.
•
Stroke limit
Limit of the maximum open position /flow rate by means of
adjusting screw.
english
9