Full Extension Oven Racks; Remove And Replace Oven Racks; Low Profile Oven Rack - Monogram ZGP304N Manuel Du Propriétaire

Full
extension
burns, place the racks in the correct position
oven racks
before turning on the oven.
The correct rack position depends on the
kind of food and the browning desired.
To remove a rack:
Remove
and
1. Make sure the rack is pushed all the way into
replace
oven racks
2. Grasp the rack by both its upper front rail and
3. Firmly holding onto both the upper and lower
low profile
The low profile oven rack is designed for
oven rack
optimized performance when baking or broiling
certain foods in your Monogram Professional All-
Gas range. It can also be used as a normal oven
rack with the full extension oven racks as well.
18
CAUTION:
To avoid possible
the oven.
its lower front rail and lift straight up to unlock
the front rack locks from the rack supports.
Lift to unlock front
rack locks from
the rack support
Front rack lock
front rack rails, pull the rack forward and
remove it from the oven.
Upper
front
rail
Oven Racks
The racks have a frame that locks into the
rack supports on both sides. Once the frame is
locked into place, always pull the rack out, by its
upper front rail, to its full extension stop position,
when placing or removing cookware.
To replace a rack:
1. Place the rear rack locks over and onto
Lower
front
Upper
rail
front
rail
2. Slide the rack all the way in until the
Lower
front
rail
3. Pull the rack all the way out to check that it is
Please refer to the oven rack position table for
your bake/broil/convection mode for details as to
location and rack type for the best performance.
Professional All-Gas Range
the rack supports (five rack positions are
available including the top position).
rear rack locks are secure on the rear rack
supports and press the front rack locks onto
the front rack supports.
Slide the rack all the way in
and push down to lock the
front rack locks onto the
front rack supports
properly engaged.
Front
rack
lock