Oven Racks; Full Extension Oven Racks; Remove And Replace Oven Racks - Monogram ZDP486NRPSS Manuel Du Propriétaire

Masquer les pouces Voir aussi pour ZDP486NRPSS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Full
extension

oven racks

Remove
and replace
oven racks
18
CAUTION
To avoid possible burns,
place the racks in the correct position before
turning on the oven.
The correct rack position depends on the kind
of food and the browning desired.
To remove a rack:
1. Make sure the rack is pushed all the way
into the oven.
2. Grasp the rack by both its upper front rail
and its lower front rail and lift straight up
to unlock the front rack locks from the rack
supports.
Lift to unlock front
rack locks from the
rack support
Front rack lock
3. Firmly holding onto both the upper and
lower front rack rails, pull the rack forward
and remove it from the oven.
Upper
front
rail
Oven Racks
The racks have a frame that locks into the
rack supports on both sides. Once the frame
is locked into place, always pull the rack out,
by its upper front rail, to its full extension stop
position, when placing or removing cookware.
To replace a rack:
1. Place the rear rack locks over and onto
the rack supports (five rack positions are
available including the top position).
Lower
front
Upper
rail
front
2. Slide the rack all the way in until the rear
rail
rack locks are secure on the rear rack
supports and press the front rack locks onto
the front rack supports.
Lower
front
rail
3. Pull the rack all the way out to check that it
is properly engaged.
Professional Dual Fuel Range
Slide the rack all the way
in and push down to lock
the front rack locks onto
the front rack supports
Front
rack
lock
49-85247

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Zdp366nnssZdp366npssZdp486ndnssZdp486nrnss

Table des Matières