Monogram ZGP304N Manuel Du Propriétaire page 40

Masquer les pouces Voir aussi pour ZGP304N:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PROBLEM
CONVECTION FAN
NOT ON ALL THE TIME
BURNERS DO NOT
LIGHT OR SPARK
RANDOMLY
BURNERS HAVE
YELLOW OR YELLOW-
TIPPED FLAMES
BURNER FLAMES VERY
LARGE OR YELLOW
BURNER CONTROL
KNOB WILL NOT TURN
CONDENSATION OR
FOGGING ON THE
INNER DOOR GLASS
40
POSSIBLE CAUSE
The convection fan (depending on the function you are using) may cycle on and
off until the function is over or the door is opened for optimized performance.
This is normal. In additin, the convectin fan may cycle in the clockwise and
counterclockwise direction until the function is over or the door is opened.
Electrical plug is not plugged into a live power outlet.
Gas supply not turned on.
Burner parts not replaced correctly.
Holes in the simmer rings or slits in the burner rings are clogged.
Clogged orifice, or wet burners or electrodes.
Cooktop Lockout feature is activated.
A fuse in your home may be blown or circuit breaker tripped.
Burner parts not replaced correctly.
A. Yellow flames: Call for
service.
If burner flames look like (A), call for service. Normal burner flames should look
like (B) or (C), depending on the type of gas.
The range may be connected to the wrong fuel type. Contact the person who
installed your range or made the conversion
When the knob is at the OFF position, it must be pushed in before it can be
turned, and it can only be turned in a counterclockwise direction. When the
knob is at any other position, it can be turned in either direction without being
pushed inwards.
Condensation or fogging on the inside of the oven door glass is normal
during the preheating of the oven and will evaporate usually by the end of the
preheating cycle.
The Problem Solver
Professional All-Gas Range
B. Yellow tips on outer cones:
Normal for lP gas.
C. Soft blue flames: Normal
for natural gas.

Publicité

Table des Matières
loading

Table des Matières