Manual Setup-Mode, Drive Upwards Against The Limit Stop - Selve SEZ Notice

EN Setting of the end positions

4.5.3. Manual setup-mode, drive upwards against the limit stop

 in operation bottom position, top stop/release
When the movement is interrupted once, the system is in manual setup­mode.
Important: A limit stop for the upper end limit is necessary!
First the lower end limit has to be run­up to. From there move against the upper limit
stop without interruption.
Setting with
setting switch
E
6 s
E
E
3 s
E
Auto­Stop
Drive
Press the E button of the setting switch for 6 seconds.
Move the motor to the lower end position with the UP or
DOWN button.
Press the E button for 3 seconds.
The correct rotation direction assignment will be carried out
at the end of the end position setting.
Run against the limit stop at the top without stopping;
the motor stops automatically.
The end positions are now set and the rotation direction
assignment is correct. Perform a test run.
32