Information About The Motor Features; Designated Use; Basic Motor Properties - Selve SEZ Notice

EN Information about the motor features

2. Information about the motor features

2.1. Designated use

The SEZ motor must only be used as a drive in fabric shafts in sun protection installa­
tions, insect protection installations or obscuration systems that are con structed and
executed according to the ZIP system.

2.2. Basic motor properties

Obstacle detection system after the limit position setting in the downwards
direction
Reversing function: Relieving after running onto an obstacle in the down­
wards direction (automatic reversion up to three times)
Reversing function: Overload protection in the upwards direction if the
torque is too high, freezing protection (automatic reversion up to three
times)
Automatic detection of up­ and downwards direction after occurred end
limit position setting
Parallel connection of several motors possible
Automatic setting of the lower end position
Automatic setting of the upper end position and release
Switch­off bottom: fixed point possible
Switch­off top: fixed point possible
Further notes:
The obstacle detection of the drives has been developed to protect the sun protection
installation, the insect protection or the obscuration system against damages.
Since, depending on the position of the hangings, when an obstacle is detected, the
entire hanging weight may have to be stopped before the object detection system trips,
do not use the motor's obstacle detection system for personal protection.
The airborne noise of the motor is significantly below 70 dB (A). Depending on the type
of the roller shutter/awning/screen a strengthening of the sound intensity of the motor
is possible. It can be reduced by use of appropriate measures (e.g. insula tion of the
box, using noise protection plugs, etc.).
General features
End position setting
24
yes
yes
yes
yes
yes
yes
yes
yes
yes