SilverCrest SPO 910 A1 Mode D'emploi page 9

CAUTION! PROPERTY DAMAGE!
Do not use an external timer switch or a separate remote
►
control system to operate the appliance.
Never leave the appliance unattended during operation.
►
Ensure that the appliance, the power cable and the plug do
►
not come into contact with heat sources such as hotplates or
naked flames.
Do not use charcoal or similar fuels to operate the appli-
►
ance!
Never cover the pizza oven with cloths or other items during
►
operation. They could catch fire!
Treat the terracotta dome carefully. It is fragile!
►
Operate the appliance only with the original accessories
►
supplied.
Before first use
1) Clean all parts as described in the section "Cleaning and care" to remove any
production residues. Make sure that all parts are completely dry before ope-
rating the appliance.
WARNING! RISK OF FIRE!
► Never set up the appliance underneath wall cupboards or next to curtains,
cupboard walls or other flammable objects.
► Always place the appliance on a heat-resistant surface.
2) Set up the appliance as described in the section "Setting up and assembly".
3) Insert the plug into the mains power socket. The control lamp 5 lights up red
to indicate that the appliance is in operation. The heating elements 7 start to
heat up.
4) Preheat the appliance for 10 minutes.
│ GB │ IE
■ 6 SPO 910 A1