Storage; Accessories And Replacement Parts; Warranty And Product Registration; Contacting Msa - MSA Cairns 1010 Manuel D'utilisation

8

Storage

• Do not store equipment that is not explicitly authorized by MSA in or on the fire helmet. The
storage of gloves, wedges, lights, and other equipment in or on the fire helmet can dramatically
change the protective capacity of the fire helmet.
• Store the fire helmet in a clean, dry area where it is not exposed to heat, cold, or sunlight.
• Keep leather products away from direct sunlight, open windows, hot ovens, and radiators.
• Do not store the fire helmet with the lining ratchet face down on a flat surface. Storing the fire
helmet with the ratchet fully extended can cause the lining band and ratchet band mechanism to
bend or become distorted, which can affect comfort and fit.
• When not in use, store the fire helmet with the ratchet suspension set to its smallest size.
9

Accessories and Replacement Parts

See our catalog, visit MSAFIRE.com, or contact your authorized fire service distributor for a full line of
genuine MSA accessories and replacement parts.
10

Warranty and Product Registration

For fire helmets manufactured on or after January 1, 2015, refer to ID 3600-72-MC
("MSA Cairns 10-Year Warranty and Terms of Sale").
For fire helmets manufactured before January 1, 2015, refer to ID 3600-09-MC ("Cairns Lifetime
Warranty and Terms of Sale"). Warranty documents are available for download on every Cairns Fire
Helmet web page. Visit MSAFIRE.com.
Registering your new fire helmet is important! Registering your new fire helmet will help MSA provide
quicker, more efficient service and support. Your product registration can help ensure you get the most
out of your warranty, especially if your fire helmet was a gift and you don't have a proof of purchase
date.
Registering your product will solidify the start date on your warranty period and eliminate confusion and
frustration if you ever have to take advantage of your warranty.
Finally, in the unlikely event a safety notification or warranty service is required, MSA will have the
ability to contact you. Your completed registration also helps us to keep you updated on support,
service, product information and promotions/special offers.
To register your new MSA Cairns Fire Helmet, go to http://us.msasafety.com/productRegistration.
11

Contacting MSA

US
Keep these instructions in a safe place so you can refer to them in the future. For questions regarding
the operation of this fire helmet or suggestions and comments about it, contact Customer Service at
1-877-MSA-FIRE.
30
MSA Cairns Fire Helmets