Models 360R, 360R-13, And 360S - MSA Cairns 1010 Manuel D'utilisation

5.4.5
1 Shell
2 Goggle brackets
3 Screws
4 Impact cap
NOTICE
Model 360R-13 does not include an impact cap.
(1)
(2)
(3)
US
(4)
(5)
(6)
(7)
26

Models 360R, 360R-13, and 360S

1
2
4
3
7
Turn the fire helmet upside down.
Remove the ear cover and headband.
Remove the impact cap from the shell.
If necessary, do the following to remove the suspension from the impact cap:
a) Disconnect the four suspension attachment clips from the fire helmet slots.
b) Pull up firmly on the suspension to remove it from the impact cap.
If necessary, do the following to install the suspension in the impact cap:
a) Install the suspension in the impact cap.
b) Connect the suspension attachment points to the retaining tabs on the impact cap.
c) Pull on the suspension to make sure the suspension attachment points are fully engaged
and secure.
Install the impact cap assembly in the shell.
Install the headband and ear cover.
2
3
4
5
6
5 Suspension
6 Headband
7 Ear cover
MSA Cairns Fire Helmets