User File Backup; Databank Management - Corghi EXACT LINEAR PLUS Manuel D'utilisation

It is possible to lock the automatic movement with
the key 0 of the numerical keypad and continue
with PAGE UP or PAGE DOWN.
Automatic movement is restored at the end of
the job.
If special movements or maintenance tasks are to
be carried out from the main page, press key 2 of
the numerical button pad to move the beam fully
up, or key 3 to move it fully down.

USER FILE BACKUP

From the logo page, select the icons
and , Fig. 31.
The page shown in Fig. 32 will open, allowing
you to select the backup or restore procedure
of the data regarding:
• The databank.
• Files of jobs carried out.
• Customer databank.
• Calibration log.
Backup procedure:
In the window shown in Fig. 32, select the icon
DATA SAVING. The page shown in Fig. 33 will
open, and here it is possible to set:
• The path for saving (HARD DISK, REMOVABLE
SUPPORTS, etc.).
• The frequency of the autosaves.
• Confirmation of the user before carrying out
the autosaves.
• Saving in compressed format.
Press Continue in order to proceed. The save
will be indicated as in Fig. 34.
The programme returns to the page shown in
74
Fig. 32. Click on the icon
the LOGO page.
Restore procedure:
In the window shown in Fig. 32, select the DATA
RESTORE icon. The page shown in Fig. 36 will
open, and here it is possible to select the path
leading to the data to be restored.
Once the correct path has been selected,
the data regarding the save are shown in the
lines below.
Press Continue in order to proceed. The indica-
tion of Fig. 37 will appear.
Press Continue to proceed with the restore, or
Cancel to cancel the operation.
Once the restore is completed, the indication
of Fig. 38 will appear, informing you to restart
the alignment programme in order to register
the data restore.
The programme returns to the page shown in
Fig. 32. Click on the icon
the LOGO page.

DATABANK MANAGEMENT

Database management functions
To access the databank management tools,
from the main menu page select the
and icons. When prompted, type the
password; the aligner is delivered with the default
password "databank".
To move around the records, use the keys as
follows:
←, → to scroll through the fields and confirm
the insertion.
←, → in the INS function (obtained by pressing
the Insert key and highlighted in the status bar
by the symbol
individual characters of the field.
↵ to confirm the entries.
↑, ↓ to access the choice list in the COMBO boxes
(boxes identified by the symbol
you to select a value from those already filed)
and ↵ to confirm the choice.
ESC to abort the last selection or move the cursor
Operator's manual EXACT LINEAR
to go back to
to go back to
) to scroll through the
and allowing