Job Record - Corghi EXACT LINEAR PLUS Manuel D'utilisation

Fill in the heading of the job record
and print and/or save the job done using the
appropriate commands.
When the printout is complete, end the job and
return to the main menu
job for any further adjustments.
(15) Graphic printouts
The current printed report, supplied in alpha-
numeric form, has now been updated with the
addition of two annexes consisting of graphics
which illustrate some information about the
vehicle in intuitive form.
The first annex, entitled "Vehicle Situation",
shows the toe, camber and setback values before
and after adjustment.
The second annex, entitled "Chassis Situation",
lists the set-back, track difference, wheel base
difference, side offset and offset values of the
axles after adjustment.
The "Print \ Type" field of the user set-up can
be set appropriately to select the annexes to
be printed:
• "Alphanumeric" prints the alphanumeric pages
only.
• "Vehicle Situation" prints the alphanumeric
report and the vehicle situation annex. This
setting is indicated by the
print page status bar.
• "Chassis Situation" prints the alphanumeric
report and the chassis situation annex. This
setting is indicated by the
the print page status bar.
• "Complete" prints the alphanumeric report
and both annexes.
The set-up can be varied on the print page.
PRINT ON FILE. If selected, allows the
data to be printed in a CSV (Comma Separated
Values) file.
COLOUR PRINT. If selected, the printed
reports will be in colour.
70
preliminary check reports are printed.
or restart the
From the printing stage, access the job record
using the
instead of selection of the vehicle from the da-
tabank can also be set in the set-up.
Another setting that can be made in the set-up
is the type of job record to be used.
Fill in the job record by using the keys as de-
scribed in the "DATABANK MANAGEMENT"
section.
The compulsory fields are highlighted.
When a customer or vehicle is selected from
those already on file, the relative data are
icon in the
loaded in the job record (e.g., when a vehicle
is selected by means of the registration num-
ber, the customer and the vehicle saved in
the vehicle record are automatically loaded).
These data overwrite those entered previously,
icon in
so the selected vehicle may be modified in the
databank.
When a new value is entered in the REG.N.,
CHASSIS and CUSTOMER fields, a new record
is automatically opened for data input.
When the job done is saved, the vehicle and
customer records are also automatically updated.
PRINT PRELIMINARY CHECKS. The
ALPHANUMERIC PRINT (standard).
VEHICLE SITUATION GRAPHIC PRINT.
CHASSIS SITUATION GRAPHIC PRINT.

JOB RECORD

icon. Use of the job record
WARNING
Operator's manual EXACT LINEAR