Corghi EXACT LINEAR PLUS Manuel D'utilisation page 56

ROC recall Recalls the compensation
values saved previously.
Databank
Car markets Selection of the distribution
markets of the databank vehicles.
Commercial description of vehicle De-
scription of the vehicle with the commercial name.
Manufacturer's description of vehicle
Description of the vehicle with the name given by
the manufacturer for univocal identification of the
alignment reference data.
Databank selection Selection of the
databank archive from which the vehicles will be
selected.
Main databank Sets the main archive as
the databank for use.
User databank Sets the secondary archive
entered by the user as the databank for use.
Both databanks Sets the combination of
the main and secondary archives as the databank
for use.
Printout and job record
Print Prints the data.
Save and print Saves the current job in the
jobs archive and prints the data.
Saves the current job in the jobs archive.
Compile job record Recalls compilation
of the job record data.
Vehicle adjustments
Copy Starts copying of the vehicle adjust-
ment help function.
56
function and restarts it from the same point.
returning to the first image (only applies to ani-
mations, not to stationary images).
ment help function.
ment help function.
adjustment help function.
adjustment help function.
adjustment help function.
pin adjustment help function.
curve adjustment help function.
toe curve measurement help function.
Set-up and maintenance
dure is executed in demonstration mode; use of
targets not required.
Save job
procedure.
freshing the job archive and the user databank.
Pause Stops copying of the vehicle help
Stop Stops playback of an animation,
Front toe Selects the front toe adjust-
Rear toe Selects the rear toe adjust-
Front camber Selects the front camber
Rear camber Selects the rear camber
Front caster Selects the front caster
Front king pin Selects the front king
Toe curve adjustment Selects the toe
Toe curve measurement Selects the
Demo Vehicle wheel alignment proce-
Set-up Recalls the aligner set-up
Save data Procedure for saving or re-
Service Programs
Operator's manual EXACT LINEAR