Corghi EXACT LINEAR PLUS Manuel D'utilisation page 58

between centesimal and sexagesimal degrees.
Pressure unit of measurement Switches
the unit of measurement for pressure values
between PSI and BAR.
Technical assistance
USB KEY update, Main USB KEY up-
date procedure.
USB KEY Data Record, USB KEY
reading.
Job counter Displays the number of
jobs done.
Status bar
The status bar shows messages of use during
execution of the program, in graphic form.
Insertion mode Using the keys ←
and → the cursor moves within the field and not
between two adjacent fields.
Car procedure "Demo" mode for which
the targets are not required.
Maximum steering angle enabled.
Non standard toe sign convention.
Non standard thrust angle sign con-
vention.
Save job in progress.
PC keypad
The keypad function keys give rapid access to
programme steps. They always retain the same
functions and are only active if the relative icon
is included in the screen.
The keys indicated as in the following example
È+F12 are the combination of the "Upper case"
key and the key indicated (in the example, F12).
Key Name
F1 Databank selection
58
F2
F3
F4
F5
F6
F7
F8
F9
F11
F12
È+F1
È+F12 Information window
Characteristic angle symbols for
In the adjustment screens, the vehicle's char-
acteristic angles are referred to by means of
graphic symbols.
signs.
standard sign conventions.
Icon NAULT sign conventions.
Rim diameter
Chassis clearance
Steering angle
State of vehicle
Rear axle
Front axle
Print
End of job
Databank
Help
Test screen
Recalls the information about the
aligner software and databank onto
the screen.
adjustment screens
Total front toe with standard signs.
Total front toe with RENAULT reversed
LH and RH half toes with
LH and RH half toes with RE-
LH and RH camber.
Operator's manual EXACT LINEAR