Setting The Instrument Functions (Parameter Level) - JUMO eTRON M Notice De Mise En Service

4.2 Setting the instrument functions (parameter level)

H
Time-out:
If no key is pressed for 60 seconds, the instrument automatically switches back to the process value display,
see Overview of operation on the front inside page.
The instrument functions and values are set at the parameter level.
h
Press the key for 3 seconds and
h
Set code 72 for accessing the parameter level by using the
The longer the key is pressed, the faster the value will change.
h
Acknowledge with
parameter name and value appear alternately, e.g.
h
Use the and
h
Acknowledge setting with
h
Set next parameter, see Overview of operation on the front inside page.
H
Switching parameters out of display:
The table below lists all parameters for each instrument type.
Depending on the type designation on the nameplate, parameters which are not required can be hidden.
,
keys to set the value within the specified value range.
.
will appear alternately.
and keys.
.
10