Tools Required - salmson S Serie Manuel D'installation Et Mise En Service

ENGLISH
9.5 TOOLS REQUIRED
A typical range of tools that are required for pump maintenance is
listed below. Those tools are standard one and should be available
in every industrial maintenance Dpt.
• Wrenches to suit up to M48 nuts,
• Socket spanner up to M 48,
• Allen keys up to 10 mm,
• Range of screwdrivers,
• Soft mallet.
If maintenance work must be performed in an ATEX classified area
then make sure that use of all necessary tools are authorized in the area.
More specialized equipment :
• Bearing pullers,
• Bearing induction heater for ball bearing assembly,
• Coupling grip spanner.
Additional equipments used for coupling alignment :
• Calipers,
• Crowbar,
• Straightedge,
• Shims,
• Sledgehammer.
20