Maintenance And Repairs; Maintenance - Bosch Rexroth CSS/B Mode D'emploi

24 Bosch Rexroth AG
WARNING!
CAUTION!
NOTE!
9

Maintenance and Repairs

9.1

Maintenance

Electric shock due to contact with live parts, unexpected belt section start-up
Severe injuries or death.

Switch off the power supply before performing any maintenance or repair work.

Switch off the compressed air supply before performing any maintenance or
repair work.

Take suitable measures to prevent inadvertent restoration.
Hot electric motor surfaces during operation
Possible burns if the hot surface (up to 70°C) is touched.

Provide appropriate safety devices to seal off the motors.

Let the system cool off for at least 30 min. before performing any maintenance or
repair work.
3
Fig. 7
9.1.1 Bearings
All bearings are provided with lifelong lubrication and are maintenance-free under
normal conditions.
Bearing malfunctions
Moistening of the bearings with grease-dissolving substances, e.g. for cleaning
purposes, will lead to bearing malfunctions. There is a danger of damage to property.

Keep grease-dissolving or aggressive cleaning agents away from the bearings!

Only clean the belt section with a slightly damp cloth.
TS 2pv 3 842 540 837 (2010.02)
1
CSS/BM
2