Transport And Storage; Transporting The Belt Section; Storing The Belt Section - Bosch Rexroth CSS/B Mode D'emploi

10 Bosch Rexroth AG
WARNING!
5

Transport and Storage

Observe the transport instructions on the packaging.
When storing and transporting the product, always observe the ambient conditions
specifi ed in the Technical Data ( 31).
5.1

Transporting the belt section

Suspended loads may fall if the equipment to hold the loads has not been
properly dimensioned or is incorrectly suspended
Falling objects may result in severe injuries (or even death).

Do not stand under suspended loads.

Use lifting equipment with a suffi ciently high bearing load (for product weights,
see "Technical Data"  31).

Carefully secure lifting equipment.

Only lift the product at the intended locations.

5.2 Storing the belt section

Always store the belt section on a fl at surface.
TS 2pv 3 842 540 837 (2010.02)