Falcon Professional+ 110 Mode D'emploi page 18

Check the appliance is electrically safe and gas sound when you have finished.
You will need the following equipment to complete the
cooker installation satisfactorily:
STABILITY BRACKET
If the cooker is to be supplied with gas
through a flexible hose, a stability bracket
or chain must be fitted.
These are not supplied by with the cooker but are
available at most builders' merchants.
GAS PRESSURE TESTER
FLEXIBLE GAS HOSE
Must be in accordance with the
relevant standards.
MULTIMETER
(for electrical checks)
You will also need the following tools:
1. Electric drill
2. Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3. Wall plugs (only required if fitting the cooker on a stone
or concrete floor)
4. Steel tape measure
5. Cross head screwdriver
6. Flat head screwdriver
7. 4mm & 3mm Allen keys
8. Spirit level
9. Pencil
10. Adjustable spanner
11. Screws for fitting stability bracket
All manuals and user guides at all-guides.com
INSTALLATION
ArtNo.020-0013 Stability bracket
ArtNo.020-0014 Gas pressure tester
ArtNo.020-0015 Flexible gas hose
ArtNo.020-0016 Multimeter
16
Checking the parts
4 pan supports
ArtNo.110-0002 110 pan supports
Grill pan and trivet
ArtNo.000-0003 Slide out grill pan
Handyrack
ArtNo.324-0003 Handyrack
Plinth
Wok cradle
ArtNo.000-0009 Wok ring, cast
Levelling tool and Allen keys
ArtNo.000-0002 Classic tools
3 flat oven shelves and 1 drop
shelf
ArtNo.324-0002 Oven shelf
Roasting tin
ArtNo.324-0004 Roasting tin
Griddle
ArtNo.000-0008 Griddle