Falcon Professional+ 110 Mode D'emploi page 27

WARNING - SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
22. To Remove the Left-Hand Oven Bottom and Top
Elements
Disconnect from the electricity supply.
Bottom Element
Pull the cooker forward to access the cover boxes at the rear
of the unit. Remove the fixings that secure the cover and lift it
clear.
ArtNo.322-0002 Oven bottom element access
�
Remove the two screws 'A' and allow the plate to drop down.
Remove the two screws B, lower the upper plate and remove
through the slot in the cooker back.
Undo the terminal connections, noting their positions.
Remove the element fixings and withdraw the element.
Replace the element and re-assemble parts in reverse order.
Top Element
Open the left-hand oven door and undo the fixings that
secure the heat shield. Remove the top element bracket
fixings and withdraw element. Replace the element and re-
assemble parts in reverse order. Check that the oven operates
satisfactorily.
23. To Adjust an Oven Door Angle
The bottom hinge of either oven door can be adjusted to alter
the angle of the door. Loosen the bottom hinge fixing screws
and use the notch and a flat bladed screwdriver to move the
position of the hinge to set the hinge position.
Retighten the hinge screws.
Effect of hinge adjustment – exaggerated for clarity
ArtNo.320-0006 Oven door hinge adjustment 1
Centre line of hinge pin
ArtNo.320-0007 Oven door hinge adjustment 2
Oven door omitted for clarity
All manuals and user guides at all-guides.com
�
�
25