Publicité
Les langues disponibles
Les langues disponibles
Adjusting the planting unit load
B
UN41-0556BN
The adjustment unit is usually mounted in position
(A1).
With the unit (A) in position (A1) the weight on the pack-
ing wheels can be reduced.
With the unit (A) in position (A2) the weight on the pack-
ing wheels can be increased.
The unit (B) enables to increase or decrease the weight
applied by the unit (A) to the packing wheels.
Adjusting the automatic safety release function
UN41-0557BN
The automatic release is designed to protect the trans-
mission components from overloads (e.g. if the dispens-
er or ejector jams).
The device, installed on every planting unit, is already set
by the manufacturer during the testing stage, but can be
adjusted by the user according to requirements.
English language
ADJUSTMENT INFORMATION
D
A
A1
A2
The weight (load) to be applied to the packing wheels
is obtained by the combined action of the adjustment
units (A) and (B).
Proceed as outlined below.
1) As regards the position of the adjustment unit (A),
turn the handwheel (C) and the handwheel (D) to ap-
ply the ideal weight to the packing wheels.
For adjustments, proceed as outlined below.
1) Turn the ring nut (A) clockwise to increase the release
resistance (i.e. less sensitive).
2) Turn the ring nut (A) anticlockwise to decrease the
release resistance (i.e. more sensitive).
27
5
Use and maintenance
Publicité
