Checchi & Magli DUAL 12 GOLD Manuel D'utilisation Et D'entretien page 61

Lifting the work vehicle
WARNING
During lifting watch out for the load swinging, as
the hook-up point is never perfectly at the centre of
gravity.
D
UN41-0545BN
Proceed as outlined below.
1) The specific tool (A) provided with the work vehicle
for lifting.
2) Strap up the work vehicle as shown in the figure.
English language
SAFETY INFORMATION CONCERNING HANDLING AND
INSTALLATION
A
13
Lifting operations must be carried out using suitable
means for the load to be lifted, by qualified and author-
ised personnel in order to safeguard their own safety
and that of the other people involved in the operations.
The illustration shows the hook-up points for lifting the
work unit with two planting units fitted.
The lifting hook-up points are the same for all work units
(see "Technical information").
3) Check that the pin (B) is secured by the lock pin (C)
and that the chains are fastened stably to the frame
(D).
4
D
Use and maintenance