Checchi & Magli DUAL 12 GOLD Manuel D'utilisation Et D'entretien page 74

Adjusting the cup opening stage timing
UN41-0555BN
Depending on the type of seedlings and on the rotation
speed, when the seedlings go down the dispenser they
may knock the side of the opening of the drop pipe and
fall in way which is not perpendicular.
The cam (A) adjusts the opening to the cup so that the
seedling is in the centre of the drop pipe (C).
The cam (B) adjusts the opening to the cup so that the
seedling is in the centre of the drop pipe (D).
English language
ADJUSTMENT INFORMATION
A
E
F
G
F
E
B
For adjustments, proceed as outlined below.
1) Loosen the screws (E) and use the cam (B).
- Turn the cam in the direction (1) to anticipate the
opening of the cup.
- Turn the cam in the direction (2) to postpone the
opening of the cup.
2) Once the adjustment is complete, tighten the screws
(E).
3) Loosen the screws (F) and use the cam (A).
- Turn the cam in the direction (1) to anticipate the
opening of the cup.
- Turn the cam in the direction (2) to postpone the
opening of the cup.
4) Once the adjustment is complete, tighten the screws
(F).
NOTICE
Do not loosen the screws (G) as this would change
the brake position or the cam height.
26
2
D
1
1
2
5
C
Use and maintenance